CAM-IMX708AF

Description

• InnoMaker IMX708 Auto focus Camera Module Compatible with raspberry pi camera V3

• Back-illuminated, stacked CMOS 12-megapixel IMX708 image sensor

• High signal-to-noise ratio (SNR)

• Built-in 2D Dynamic Defect Pixel Correction (DPC)

• Phase Detection Autofocus (PDAF) for rapid autofocus

• QBC Re-mosaic function

• HDR mode (up to 3 megapixel output)

• CSI-2 serial data output

  • 2-wire serial communication (supports I2C fast mode and fast mode plus)
  • 2-wire serial control of focus mechanism

• Resolution: 11.9 megapixels

• Sensor size: 7.4mm sensor diagonal

• Pixel size: 1.4μm × 1.4μm

• Horizontal/vertical: 4608 × 2592 pixels

• Diagonal field of view: 75 degrees

• Common video modes: 1080p50, 720p100, 480p120

• Output: RAW10

• IR cut filter: Integrated in standard variants; not present in NoIR variants

• Dimensions: 32 × 32 × 11.5mm (12.4mm height for Wide variants)

• Ribbon cable length: 150mm

• Cable connector: 15 × 1mm FPC,22 x 0.5mm FPC

• Step1, Add dtoverlay=imx708 to last line of config.txt
  • sudo nano /boot/firmware/config.txt
• Step2, Change camera_auto_detect=0
• Step3, reboot and preview
  • libcamera-hello -t 0