Grid view List view

Showing 1–8 of 34 results

3.5 Inch SPI Display-Capacitive Touch

$28.00 - $32.00

DATASHEET:  http://wiki.inno-maker.com/display/HOMEPAGE/3.5-inch-lcd-c

  • The 3.5 inch RPI lcd display TFT Capacitive Touch Screen is a display module can be applied to Raspberry pi 3 B+ Pi Zero etc. It can be used as raspberry pi x window display terminals.
  • Use the Raspberry pi high-speed SPI interface transfer Linux frame buffer data to the TFT capacity touch screen RPI LCD display module. The SPI clock can reach as high as 63Mbps.
  • The 3.5 inch LCD panel with this module have 16bit/pixel 320×480 high-resolution.
  • The TFT Touch Screen RPI lcd display module equipped with high accuracy DS3231 hardware RTC unit make your Raspberry Pi system time no longer depend on the network.
  • The RPI lcd display module can equip with resistive or capacitive tft touch screen. Two types of touch screen module can use the same software package.
  • The TFT Touch Screen RPI lcd display module used SPI, I2C and some GPIO signal from Raspberry pi 40PIN interface. Other resource in 40PIN interface can be defined by users. Same size as Raspberry pi can be directly plugged on Raspberry pi.
Add to cart
Sale!

CAM-IMX219-FOV90

$12.00 - $13.00

Feature

  • Support raspberry PI,Jetson Nano
  • CAM-IMX219 is a low-cost wide angle view camera module;
  • Provide M12 90 degree Len
Add to cart
Sale!

CAM-IMX296Color-GS, Raspberry PI GS Camera With Color Sensor Support External Trigger

$42.00 - $43.00

Datasheet: https://github.com/INNO-MAKER/cam-imx296raw-trigger

Features:

  • Support up to 60fps at 1456×1088 Pixels, Compatible with rasberry pi GS camera;
  • Support c/cs mount Lens, 20mm distance Lens seat with filter;
  • Compatible with Raspberry PI5/Pi4/PI3B+/PI3/PI2/PI B+/PI A/PI ZERO/CM4/CM3+/CM3/Jetson Nano.
  • Output format YUV with Resolution 1456*1088 up to 60fps;(Raspberry PI OS Driver);
  • Board Size 38mm x 38mm.
  • Packing List: cam-imx296color, FPC Cable x2
Add to cart
Sale!

CAM-IMX296Mono-GS, Raspbery PI GS Camera With Mono Sensor Support External Trigger

$40.00 - $43.00

Datasheet:

  • https://github.com/INNO-MAKER/cam-imx296raw-trigger

Features:

  • Support up to 60fps at 1456×1088 Pixels,Compatible with rasberry pi GS camera;
  • Comes with 1x M12 Len-seat and 1xCS Len-Seat, 1x M12 Len;
  • Support raspberry pi;
  • Output format Y10 with Resolution 1456*1088 up to 60fps (InnoMaker Driver);
  • Output format YUV with Resolution 1456*1088 up to 60fps;(Raspberry PI OS Driver);
  • Support Raspberry Pi OS Build In Drivers totally compatible raspberry pi official gs camera module with libcamera tools for all pi boards
Add to cart
Sale!

CAM-IMX477-HQ

$39.00 - $42.00

Features:

  • Sensor Type: 12.3 Megappixel IMX477R Sensor, Static Images: 12.3MP, 4056 (H)×3040 (V), 7.9mm CMOS diagonal size,
  • Support 1080p@30fps, 720p@60fps and 640x480p@90fps video record.
  • support c/cs mount Lens, 20mm distance Lens seat with filter;
  • Compatible with Raspberry PI5/Pi4/PI3B+/PI3/PI2/PI B+/PI A/PI ZERO/CM4/CM3+/CM3/Jetson Nano.
  • Output: RAW12/10/8, COMP8, Board Size 38mm x 38mm.
  • Packing List: cam-imx477, FPC Cable x2,

 

 

Add to cart
Sale!

CAM-IMX708AF

$17.00 - $19.00

Github:

  • https://github.com/INNO-MAKER/cam-imx708af

Features:

  • – Back-illuminated, stacked CMOS 12-megapixel IMX708 image sensor
  • – High signal-to-noise ratio (SNR), built-in 2D dynamic defect pixel correction (DPC)
  • – Phase detection autofocus (PDAF) for rapid autofocus
  • – Diagonal field of view: 75 degrees, common video modes: 1080p50, 720p100, 480p120, output RAW10
  • – Supports Raspberry PI5, PI4, PI3
Add to cart
Sale!

CAM-MIPI290Mono

Original price was: $179.00.Current price is: $169.00.

Features:

  • CAM-MIPI290MONO module with SONY IMX290LLR Sensor, and connects via a ribbon cable to the CSI connector on the Raspberry Pi. It is a fully V4L2 compatible device.
  • CAM-MIPI290MONO module can be connected to a number of RPI boards, like Raspberry Pi 4 3B+ 3B Zero A+ CM3+ CM3.
  • CAM-MIPI290MONO is an Industrial Camera Module for Raspberry Pi 4 3B+ 3B Zero A+ CM3+ CM3.
  • Fully Compatible with Raspberry PI Build In Driver
Add to cart
Sale!

CAM-MIPI327RAW-Color

$28.99 - $34.99

DATASHEET: https://github.com/INNO-MAKER/CAM-MIPI327RAW-and-CAM-MIPI462RAW

Bulk Orders: sales@inno-maker.com

 

 

Add to cart